I'm fairly new to this stuff (a couple of years), and I've been pretty focused on just doing what I was told (thanks Paul , so I haven't spent a whole lot of time on the forums. Now that my process works pretty well (and consistently), I need to 'refine' it. So, I'm reading posts on methanol recover, and dry wash, etc.
One thing that I run into is abbreviations I don't know.
I was wondering if it would be possible to build a page of standard forum abbreviations? I was thinking of a single page and not a discussion (with many posts). If necessary, there could be sections specific to each forum (quality, equipment, esterification, methanol recovery).
If this is considered a good idea, then perhaps a sticky in the appropriate forums to the page.
Or has this already been done and I've missed it? :O
It probably should be a sticky (if it isn't already).
I'm still guessing on some. Some things have multiple abbreviations.
Likewise, there are a few abbreviations that could be ambiguous, but are usually clear from the context.
AE - Acid Esterification
AGW - Anthropogenic Global Warming
Alkaline - Basic solution (pH > 7). Usually having a base such as NaOH or KOH added.
ATF - Automatic Transmission Fluid
B5 - 5% Biodiesel, 95% Diesel
B20 - 20% Biodiesel, 80% Diesel
B99 - 99 (or 99.9%) Biodiesel, 1% Diesel (some tax regulations require slight amounts of Diesel, and thus this is a commonly available commercial mix).
B100 - 100% Biodiesel
BD, Bio - Biodiesel
CAT - Catalytic Converter
CAT - Caterpillar (heavy equipment manufacturer).
Caustic - Generally considered to be either Lye (Sodium Hydroxide, NaOH), or Caustic Potash (Potassium Hydroxide, KOH).
cc = cm3 = ml - Cubic Centimeter, Milliliter.
CDI - Common Rail Diesel Injection (Mercedes)
CH3OH - Methyl Alcohol (Methanol)
CNG, NG - Compressed Natural Gas (Methane, or mix of short chain alkanes primarily Methane and Ethane)
CO - Carbon Monoxide. Product of incomplete Combustion.
CO2 - Carbon Dioxide
CRD - Common Rail Diesel (Chrysler Jeep)
D, D100 - Diesel
Dino - Diesel (or Gasoline)
DMV - Department of Motor Vehicles (often local/state)
DOE - Department of Energy
DOT - Department of Transportation
DPF - Diesel Particulate Filter
Dr Pepper - Phrase coined to describe small test batches of biodiesel such as could be made in a Dr Pepper® soda bottle. Also used to describe simple methods for a variety of other biodiesel related tests and procedures.
E10 - 10% Ethyl Alcohol (Ethanol), 90% Gasoline
E85 - 85% Ethyl Alcohol (Ethanol), 15% Gasoline
EPA - Environmental Protection Agency
ETOH - Ethyl Alcohol (Ethanol)
FAME - Fatty Acid Methyl Ester (biodiesel)
FFA - Free Fatty Acids
FPHE - Flat Plate Heat Exchanger
g, or gm - gram
g, or gal - gallon, usually considered a US Liquid Gallon, (3.785 liters)
GFCI - Ground Fault Circuit Interrupter... Required for plugs around water.
Glycerin, Glycerol - Usually considered the byproduct of biodiesel production, and contains a mix of Glycerin, Free Fatty Acids, and salts.
GM - General Motors (Chevrolet)
GVW - Gross Vehicle Weight
H2 - Hydrogen in elemental form is a dimer.
H2O - Water
H2SO4 - Sulfuric Acid, or Battery Acid, commonly used in Acid Esterification.
HCl - Hydrochloric Acid, or Muratic Acid.
HEET - Fuel De-Icer. Good source for Methanol in small quantities
HHO - Product from electrolysis of water, used as very questionable fuel supplement.
HHO - Home Heating Oil
HIH (TIH) - Hose in Hose. Usually a fuel hose inside of a hot water hose.
HOH (TOH) - Hose on Hose. Fuel and hot water hoses running next to each other.
HTAE - High Temperature Acid Esterification
IP - Injection Pump
IsoHEET - Fuel deicer, made of isopropanol rather than methanol. Some people prefer it for titration solutions.
K - Kerosene
K, Kilo - Thousand, or Kilogram (kg)
K - Potassium
KOH - Potassium Hydroxide (also known as Caustic Potash)
LNG, NG - Liquified Natural Gas (Methane, or mix of short chain alkanes primarily Methane and Ethane)
LPG, LP - Liquified Petroleum Gas (Propane, or mix of short chain alkanes, ethane, propane, and butane).
MeOH - Methyl Alcohol (Methanol)
Methoxide - Sodium Methoxide, Sodium Methylate, Potassium Methoxide, Potassium Methylate. It is available in pure crystalline form, but generally considered to be a dilute mixture formed by mixing Methanol with Sodium (or Potassium) Hydroxide.
mg - milligram
MPG - Miles per Gallon (usually considered US Liquid Gallons unless otherwise specified, (3.785 liters)
MPH - Miles per Hour
Na - Sodium
NaOH - Sodium Hydroxide (also known as lye)
NaHCO3 - Sodium Bicarbonate (Baking Soda). A weak base with low toxicity often used to neutralize acids.
NG, LNG, CNG - Natural Gas (Methane, or mix of short chain alkanes primarily Methane and Ethane)
NOx - Mix of Nitrogen oxides.
NREL - National Renewable Energy Laboratory
O2 - Oxygen in elemental form is a dimer.
O3 - Ozone, another form of oxygen, considered a pollutant in the lower atmosphere.
pH - Measurement of Acidity of substance. Low numbers (0,1) are highly acidic. High numbers (14) are highly basic or alkaline. 7 is Neutral.
PM - Particulate Matter
PM - Personal (Private) Message
RUG - Regular Unleaded Gasoline
SOAP - Considered to be a salt from a Free Fatty Acid chain and either Sodium or Potassium. Also may be glycerin salts. May also be just free fatty acids. Note, commercial soaps also often contain phosphates.
SVO - Straight Vegetable Oil. Can be used to describe either new or used oil, but use as unconverted fuel source.
TEFC Motor - Totally Enclosed Fan Cooled Motor
TD - Turbo Diesel
TDCI - Turbo Diesel Common Rail Injected (Ford)
TID - Turbo Intercooled Diesel
Triglyceride - The basic component of vegetable oil. Contains 3 fatty acid chains connected to a glycerin backbone.
UCO - Used Cooking Oil
UMO - Used Motor Oil
UVO - Used Vegetable Oil
VO - Vegetable Oil
VW - Volkswagen
WMO - Waste Motor Oil
WVO - Waste Vegetable Oil
Yellow Grease - Another term for waste vegetable oils
Thanks Jon for some additional suggestions.
Also, see the expanded "Glossary" in the archives:
http://www.biodieseldiscussion...howthread.php?t=1773This message has been edited. Last edited by: keelec,
Nice job Keelec!
There is also a glossary section HERE.
If you get a chance Keelec, you should post all these acronyms that I missed into that section.
Simple schematic for a pump and heater control with a high limit
Sensor for the biodiesel/glycerin layer
I can't believe I missed Acid Esterification and FPHE (updated above).
I had asked about stickies, but perhaps you're right that it just should be moved (or reposted) to the correct forum.
Perhaps I'll consider expanding the glossary that is in the archives.
Hey this is great! I followed the link to the glossary section and the archive.
But I was wondering if it would be worth making it easily available everywhere. Either a sticky in the forums, or a 'Glossary' link on the page. Of course, the downside is that everything becomes a sticky or link.
|Powered by Social Strata|