I am new to the forumand am also loking for a little help.I have an oc50
centrifuge and cannot get it to clean the oil properly.When I am done the centrifuge
is still clean inside.i run it for three hours at 90 psi even tried 85 psi and still centrifuge is clean and empty.The oil is at 150 or last attempt at 160 degrees.Any ideas I am stumped.

Two questions,

1) Are you absolutely sure the rotor is spinning?

2) Describe your oil, is it new?

Rick

Actually figured it out.I had a tiny clog and now all is good.Thanks

Sunwizard's Dieselcraft thread -

http://biodiesel.infopop.cc/ev...9605551/m/2001011761